Abdolali sarbandi, Mysam
Effect of nano-silica and bagasee fibers on bending strength and physical
properties of cement fiberboards [Volume 27, Issue 1, 2012, Pages 167-177]
Abdolkhani, Ali
Studing the effect of reducing agents (sodium borhydrade and sodium dithionite)
on chemical structures of poplar kraft and bagasse soda alkali lignin
by FT-IR spectroscopy [Volume 27, Issue 3, 2012, Pages 556-568]
Ahmadi, Mohssen
Investigating the bending strength of wooden pin in
H-shaped joints in MDF [Volume 27, Issue 3, 2012, Pages 423-433]
Akbari nia, Moslem
Investigation of selected physical, biometrical and mechanical properties of
Cerasus mahaleb (L.) mill in the middle Zagros forest site [Volume 27, Issue 2, 2012, Pages 267-274]
Arabi, Mohammad
Investigation on lateral load of joints made with various screws on
commercial wood-plastic composite [Volume 27, Issue 1, 2012, Pages 100-113]
Aryaei monfared, Mohammad hadi
Study of some Apparent, Anatomical and Physical properties of Divdal ҆s (Ammodendron persicum) wood from Zirkooh-Qhaen [Volume 27, WINTER 4, 2012, Pages 664-676]
Asadpoor, Hamideh
Investigation on relationship between tree rings of Cupressus
sempervirens l . var . horizantalis and climatic variables [Volume 27, Issue 2, 2012, Pages 361-371]
Asgari, Alireza
Investigation on the impact of multi wall carbon nano tubes (MWCNT) addition on the mechanical properties, water absorption and thickness swelling of polypropylene/old corrugated container fibers composite [Volume 27, Issue 3, 2012, Pages 522-535]
Ashrafi birghani, Sabah
Comparing the effect of alkali charge and treatment time on the properties of
bagasse and eastern cottonwood cold soda pulp [Volume 27, Issue 1, 2012, Pages 16-26]
Azadfallah, Mohammad
Effect of xylanase treatment on properties of alkaline peroxide mechanical
pulp from poplar (Populus nigra) wood [Volume 27, Issue 1, 2012, Pages 156-166]
Azimvand, Jafar
Studing the effect of reducing agents (sodium borhydrade and sodium dithionite)
on chemical structures of poplar kraft and bagasse soda alkali lignin
by FT-IR spectroscopy [Volume 27, Issue 3, 2012, Pages 556-568]
B
Bagheri, Ali
Identification of chemical compounds in hexane extractives of black
locust heartwood by GC/MS method [Volume 27, Issue 3, 2012, Pages 461-470]
Balapoor, Shamsaldin
Investigation on relationship between tree rings of Cupressus
sempervirens l . var . horizantalis and climatic variables [Volume 27, Issue 2, 2012, Pages 361-371]
Balapoor, Shamsaldin
Effects of climate variables (temperature and precipitation) on annual growth
of Zelkova carpinifolia [Volume 27, Issue 1, 2012, Pages 69-80]
Bayamzadeh, Vilma
The impact of air pollution on cross section anatomical characteristics
Of Pinus eldarica wood [Volume 27, Issue 1, 2012, Pages 129-142]
Bayramzadeh, Valima
The effect of erosion on anatomical characteristics of root and bark of Juniperus excelsa [Volume 27, WINTER 4, 2012, Pages 529-583]
Bayramzadeh, Vlima
Effect of nanoclay on mechanical properties of HDPE/wheat straw composite [Volume 27, WINTER 4, 2012, Pages 595-605]
Brancheriau, Loeic
Investigation the acoustic behavior of poplar and spruce species reaction
wood using ultrasonic technique [Volume 27, Issue 2, 2012, Pages 306-318]
Bvanaghi, Fatemeh
Effects of acetylation and press time on heat transfer in particleboard
mat from Hornbeam wood (Carpinus betulus) [Volume 27, Issue 3, 2012, Pages 510-521]
D
Delnavaz, Vahid
Investigation on the properties of totally chlorine free bleached
soda - oxygen pulp from old corrugated container [Volume 27, Issue 2, 2012, Pages 256-266]
Dosthosseini, Kazem
Study on the effect of urea addition to urea-formaldehyde adhesive on physical and mechanical properties of poplar particleboard [Volume 27, WINTER 4, 2012, Pages 649-654]
Dosthosseini, Kazem
Effect of mat moisture content and Cu nanoparticles on heat transfer and physical and mechanical properties of poplar particleboard [Volume 27, Issue 2, 2012, Pages 348-360]
Dosthosseini, Kazem
Influence of paper mill sludge on the long term hygroscopic behavior
of flat pressed wood-plastic composites [Volume 27, Issue 1, 2012, Pages 81-88]
Dost hosseini, Kazem
Evaluation of the properties of wood sawdust-cement perforated blocks [Volume 27, Issue 2, 2012, Pages 294-305]
E
Ebrahimi, Ghanbar
Investigation on bending moment resistance of L- shaped screwed corner joints constructed of Plywood members [Volume 27, WINTER 4, 2012, Pages 731-742]
Ebrahimi, Ghanbar
Investigation on lateral load of joints made with various screws on
commercial wood-plastic composite [Volume 27, Issue 1, 2012, Pages 100-113]
Ebrahimpoor kasmani, Jafar
Comparison of the NSSC pulp characteristics from Mazandaran wood and
paper mill and rapeseed straw NSSC pulp [Volume 27, Issue 2, 2012, Pages 326-337]
Ebrahimpour Kasmani, Jafar
Effects of fungal treatments on chemi-mechanical pulp and paper
properties from hornbeam wood [Volume 27, Issue 1, 2012, Pages 1-15]
Enayati, Ali akbar
Properties of high quality paper from rag fibers recycling [Volume 27, Issue 3, 2012, Pages 434-444]
Enayati, Ali akbar
Evaluation of the properties of wood sawdust-cement perforated blocks [Volume 27, Issue 2, 2012, Pages 294-305]
Enayati, Ali akbar
Investigation the acoustic behavior of poplar and spruce species reaction
wood using ultrasonic technique [Volume 27, Issue 2, 2012, Pages 306-318]
Eskini, Nima
The effect of erosion on anatomical characteristics of root and bark of Juniperus excelsa [Volume 27, WINTER 4, 2012, Pages 529-583]
Eskini, Nima
Effect of nanoclay on mechanical properties of HDPE/wheat straw composite [Volume 27, WINTER 4, 2012, Pages 595-605]
F
Faezipour, Mohammad Mehdei
Investigation on bending moment resistance of L- shaped screwed corner joints constructed of Plywood members [Volume 27, WINTER 4, 2012, Pages 731-742]
Fakhryan, Abas
Papermaking aspects of five common varieties of sugarcane in Iran [Volume 27, Issue 1, 2012, Pages 114-128]
Farajalah poor, Mohammad
Effect of mat moisture content and Cu nanoparticles on heat transfer and physical and mechanical properties of poplar particleboard [Volume 27, Issue 2, 2012, Pages 348-360]
Farzi, Mahid
Properties of high quality paper from rag fibers recycling [Volume 27, Issue 3, 2012, Pages 434-444]
Frozan, Zinab
Possibility of using non-destructive spectrophotometery to detect the poplar tension
wood and spruce compression wood in freshly cut and dried timbers [Volume 27, WINTER 4, 2012, Pages 568-753]
G
Ganjyan, Esmaeil
Effect of nano-silica and bagasee fibers on bending strength and physical
properties of cement fiberboards [Volume 27, Issue 1, 2012, Pages 167-177]
Gerar, Janin
Possibility of using non-destructive spectrophotometery to detect the poplar tension
wood and spruce compression wood in freshly cut and dried timbers [Volume 27, WINTER 4, 2012, Pages 568-753]
Ghasemian, Ali
Study of variation trends of fiber dimensions in longitudinal direction
of Zagross wheat straw in Golestan province for papermaking [Volume 27, Issue 3, 2012, Pages 545-555]
Ghofrani, Mohammad
study on the cut load test, siding strength of two ready-to-assemble corner joints and comparing them with fixed joints [Volume 27, WINTER 4, 2012, Pages 619-634]
Ghorbani, Maryam
Effects of acetylation and press time on heat transfer in particleboard
mat from Hornbeam wood (Carpinus betulus) [Volume 27, Issue 3, 2012, Pages 510-521]
Golbabaei, Fardad
Wood plastics composites: Bond formation mechanism and
mechanical properties [Volume 27, Issue 1, 2012, Pages 27-37]
Golbabaei, Fardad
The impact of reeds residue addition on physical and mechanical properties
of particleboard made from pomegranate prunings [Volume 27, Issue 1, 2012, Pages 38-50]
Golbabaei, Fardad
Papermaking aspects of five common varieties of sugarcane in Iran [Volume 27, Issue 1, 2012, Pages 114-128]
Golbabaei, Fardad
The mechanical properties of Pinus taeda L. wood growing in different
regions of Caspian forests [Volume 27, Issue 1, 2012, Pages 178-187]
H
Hajihassani, Reza
Wood plastics composites: Bond formation mechanism and
mechanical properties [Volume 27, Issue 1, 2012, Pages 27-37]
Hajihassani, Reza
The impact of reeds residue addition on physical and mechanical properties
of particleboard made from pomegranate prunings [Volume 27, Issue 1, 2012, Pages 38-50]
Hajihassani, Reza
The mechanical properties of Pinus taeda L. wood growing in different
regions of Caspian forests [Volume 27, Issue 1, 2012, Pages 178-187]
Hamasi, Amir homan
Effects of fungal treatments on chemi-mechanical pulp and paper
properties from hornbeam wood [Volume 27, Issue 1, 2012, Pages 1-15]
Hamasi, Amir hooman
Effect of xylanase treatment on properties of alkaline peroxide mechanical
pulp from poplar (Populus nigra) wood [Volume 27, Issue 1, 2012, Pages 156-166]
Hashemi Beygzadmahalleh, Seyyed Peyman
Anatomical, morphological and chemical properties of Tobacco stalk
(Nicotiana tabacum L.) [Volume 27, Issue 3, 2012, Pages 495-509]
Honarparvar, Farhang
Investigation the acoustic behavior of poplar and spruce species reaction
wood using ultrasonic technique [Volume 27, Issue 2, 2012, Pages 306-318]
Hossein, Mohammad ali
Investigation on the properties of polypropylene/old corrugated container fibers composites with added foaming agents [Volume 27, Issue 3, 2012, Pages 445-460]
Hosseini, Sayed mohammad
Decay resistance of propionylated Iranian beech wood against white rot
fungus (Trametes versicolor) [Volume 27, Issue 2, 2012, Pages 319-325]
Hosseini, Sayed mohammad
Investigation on the properties of cement fiber board produced
using waste paper [Volume 27, Issue 2, 2012, Pages 338-347]
Hosseinihashemi, Seyyed Khalil
Identification of chemical compounds in hexane extractives of black
locust heartwood by GC/MS method [Volume 27, Issue 3, 2012, Pages 461-470]
Hosseinihashemi, Seyyed Khalil
Anatomical, morphological and chemical properties of Tobacco stalk
(Nicotiana tabacum L.) [Volume 27, Issue 3, 2012, Pages 495-509]
Hosseinihashemi, Seyyed Khalil
The impact of air pollution on cross section anatomical characteristics
Of Pinus eldarica wood [Volume 27, Issue 1, 2012, Pages 129-142]
Hosseinkhani, Hossein
Study of some Apparent, Anatomical and Physical properties of Divdal ҆s (Ammodendron persicum) wood from Zirkooh-Qhaen [Volume 27, WINTER 4, 2012, Pages 664-676]
Hosseinkhani, Hossein
The Effect of Lignocellulosic Material and Nanoclay on Physical, Mechanical and Morphological Properties of Wood Plastic Composite [Volume 27, Issue 2, 2012, Pages 189-201]
Hosseinkhani, Hossein
The impact of reeds residue addition on physical and mechanical properties
of particleboard made from pomegranate prunings [Volume 27, Issue 1, 2012, Pages 38-50]
Hosseinkhani, Hossein
The potential of mesquite (somr) wood in particleboard production [Volume 27, Issue 1, 2012, Pages 51-68]
Hosseinkhani, Hossein
The mechanical properties of Pinus taeda L. wood growing in different
regions of Caspian forests [Volume 27, Issue 1, 2012, Pages 178-187]
J
Jadidi, Mania
Effects of oxidized recycled fibers on paper properties [Volume 27, Issue 3, 2012, Pages 409-422]
Jafari, Mostafa
A new approach to dendroecological studies: Climate change impact on forest’ wood production in Astara (Gilan) [Volume 27, WINTER 4, 2012, Pages 690-706]
Jafari, Mostafa
Climate and environmental impacts on beech and oak wood
production in the Hyrcanian forests [Volume 27, Issue 3, 2012, Pages 386-408]
Jahan latibari, Ahmad
Investigation on the impact of multi wall carbon nano tubes (MWCNT) addition on the mechanical properties, water absorption and thickness swelling of polypropylene/old corrugated container fibers composite [Volume 27, Issue 3, 2012, Pages 522-535]
Jahan latibari, Ahmad
Investigation on the properties of totally chlorine free bleached
soda - oxygen pulp from old corrugated container [Volume 27, Issue 2, 2012, Pages 256-266]
Jahan latibari, Ahmad
Evaluation of the properties of wood sawdust-cement perforated blocks [Volume 27, Issue 2, 2012, Pages 294-305]
Jahan Latibari, Ahmad
The impact of nanoclay on the performance of polypropylene/OCC fibers/nanoclay composite [Volume 27, Issue 3, 2012, Pages 373-385]
Jahan Latibari, Ahmad
Investigation on the properties of polypropylene/old corrugated container fibers composites with added foaming agents [Volume 27, Issue 3, 2012, Pages 445-460]
Jahan Latibari, Ahmad
Investigating the properties of medium density fiberboard from
licorice root residues [Volume 27, Issue 3, 2012, Pages 471-482]
Jahan-Latibari, Ahmad
The Influence of Silica Content on Mechanical Properties of Polypropylene/Wood Powder/Silica Composite [Volume 27, WINTER 4, 2012, Pages 595-605]
Jahan-Latibari, Ahmad
The Influence of Nanoclay on the Performance of HDPE/ Wheat Straw Powder Composite Produced by Two Stage Mixing Process [Volume 27, WINTER 4, 2012, Pages 635-645]
K
Kamrani, Saeid
Study of variation trends of fiber dimensions in longitudinal direction
of Zagross wheat straw in Golestan province for papermaking [Volume 27, Issue 3, 2012, Pages 545-555]
Kargarfard, Abolfazl
Influence of rose flower stem residues on the properties of poplar
wood particleboard [Volume 27, Issue 3, 2012, Pages 483-494]
Kargarfard, Abolfazl
Effects of acetylation and press time on heat transfer in particleboard
mat from Hornbeam wood (Carpinus betulus) [Volume 27, Issue 3, 2012, Pages 510-521]
Kargarfard, Abolfazl
The Effect of Lignocellulosic Material and Nanoclay on Physical, Mechanical and Morphological Properties of Wood Plastic Composite [Volume 27, Issue 2, 2012, Pages 189-201]
Kargarfard, Abolfazl
The impact of reeds residue addition on physical and mechanical properties
of particleboard made from pomegranate prunings [Volume 27, Issue 1, 2012, Pages 38-50]
Kargarfard, Abolfazl
Investigation on physical and mechanical properties of medium density
fiberboard produced from Eucalyptus steriaticalyx fibers [Volume 27, Issue 1, 2012, Pages 89-99]
Kargarfard, Abolfazl
The mechanical properties of Pinus taeda L. wood growing in different
regions of Caspian forests [Volume 27, Issue 1, 2012, Pages 178-187]
Kazemi, Mahmood
Investigation on relationship between tree rings of Cupressus
sempervirens l . var . horizantalis and climatic variables [Volume 27, Issue 2, 2012, Pages 361-371]
Kazemi, Mahmood
Effects of climate variables (temperature and precipitation) on annual growth
of Zelkova carpinifolia [Volume 27, Issue 1, 2012, Pages 69-80]
Kazemi, Seid Mahmood
Field Test on Resistance of Alder and Horn Beech At Coastal waters of Amirabad port in Caspian Sea [Volume 27, WINTER 4, 2012, Pages 717-730]
Khademi Eslam, Habibollah
Investigation on the effect of nanoclay on physical and tensile properties of nanocomposite made from reed residues [Volume 27, Issue 2, 2012, Pages 202-211]
Kharazipoor, Alireza
Biotechnology Application in Wood Industry: Utilization of Phenol
Oxidase Enzyme as a Renewable Binder in MDF Manufacture [Volume 27, Issue 2, 2012, Pages 275-293]
Khodayari, Payam
withdrawal strength and bending strangth of L -type of nail′s joint in particleboard and MDF joints. [Volume 27, WINTER 4, 2012, Pages 676-689]
Kohpayeh zadeh, Moghgan
Wood plastics composites: Bond formation mechanism and
mechanical properties [Volume 27, Issue 1, 2012, Pages 27-37]
L
Layeghi, mohammad
Investigation on bending moment resistance of L- shaped screwed corner joints constructed of Plywood members [Volume 27, WINTER 4, 2012, Pages 731-742]
Layeghi, Mohammad
Investigation on lateral load of joints made with various screws on
commercial wood-plastic composite [Volume 27, Issue 1, 2012, Pages 100-113]
M
Mahdavi, Saeed
Comparison of the NSSC pulp characteristics from Mazandaran wood and
paper mill and rapeseed straw NSSC pulp [Volume 27, Issue 2, 2012, Pages 326-337]
Mahdavi, Saeed
The potential of mesquite (somr) wood in particleboard production [Volume 27, Issue 1, 2012, Pages 51-68]
Mahdavi, Saeed
Papermaking aspects of five common varieties of sugarcane in Iran [Volume 27, Issue 1, 2012, Pages 114-128]
Maleki, Sadegh
Investigation on bending moment resistance of L- shaped screwed corner joints constructed of Plywood members [Volume 27, WINTER 4, 2012, Pages 731-742]
Mastari frahani, Mohammad reza
Investigation on effect of acetylation and antioxidant on weathering resistance of wood/HDPE composite [Volume 27, WINTER 4, 2012, Pages 707-716]
Mastari frahani, Mohammad reza
Decay resistance of propionylated Iranian beech wood against white rot
fungus (Trametes versicolor) [Volume 27, Issue 2, 2012, Pages 319-325]
Minaei, Mansor
The Influence of Nanoclay on the Performance of HDPE/ Wheat Straw Powder Composite Produced by Two Stage Mixing Process [Volume 27, WINTER 4, 2012, Pages 635-645]
Minaei, Mansor
The impact of nanoclay on the performance of polypropylene/OCC fibers/nanoclay composite [Volume 27, Issue 3, 2012, Pages 373-385]
Mirshokraei, Ahmad
Investigation on the properties of totally chlorine free bleached
soda - oxygen pulp from old corrugated container [Volume 27, Issue 2, 2012, Pages 256-266]
Mirshokraie, Seeyed Ahmad
Studing the effect of reducing agents (sodium borhydrade and sodium dithionite)
on chemical structures of poplar kraft and bagasse soda alkali lignin
by FT-IR spectroscopy [Volume 27, Issue 3, 2012, Pages 556-568]
Mirzaei, Babak
Investigation on the stress relaxation behavior of milled
newsprint filled polyethylene composite [Volume 27, Issue 2, 2012, Pages 226-234]
Mirzaei, Babak
Influence of paper mill sludge on the long term hygroscopic behavior
of flat pressed wood-plastic composites [Volume 27, Issue 1, 2012, Pages 81-88]
Modirahmati, Sina
The impact of nanoclay on the performance of polypropylene/OCC fibers/nanoclay composite [Volume 27, Issue 3, 2012, Pages 373-385]
Modirrahmati, Sina
The Influence of Nanoclay on the Performance of HDPE/ Wheat Straw Powder Composite Produced by Two Stage Mixing Process [Volume 27, WINTER 4, 2012, Pages 635-645]
Mohammadi, Seid Ali
withdrawal strength and bending strangth of L -type of nail′s joint in particleboard and MDF joints. [Volume 27, WINTER 4, 2012, Pages 676-689]
Mohebi, Roholah
The Influence of Silica Content on Mechanical Properties of Polypropylene/Wood Powder/Silica Composite [Volume 27, WINTER 4, 2012, Pages 595-605]
Moradpour, Neda
Investigation on effect of acetylation and antioxidant on weathering resistance of wood/HDPE composite [Volume 27, WINTER 4, 2012, Pages 707-716]
N
Nazerani hoshmand, Hossein
Evaluation of the properties of wood sawdust-cement perforated blocks [Volume 27, Issue 2, 2012, Pages 294-305]
Neghad, Noraldin
Effects of oxidized recycled fibers on paper properties [Volume 27, Issue 3, 2012, Pages 409-422]
Nori, Habib
study on the cut load test, siding strength of two ready-to-assemble corner joints and comparing them with fixed joints [Volume 27, WINTER 4, 2012, Pages 619-634]
Nourbakhsh, Amir
The Influence of Silica Content on Mechanical Properties of Polypropylene/Wood Powder/Silica Composite [Volume 27, WINTER 4, 2012, Pages 595-605]
Nourbakhsh, Amir
The impact of nanoclay on the performance of polypropylene/OCC fibers/nanoclay composite [Volume 27, Issue 3, 2012, Pages 373-385]
Nourbakhsh, Amir
The Effect of Lignocellulosic Material and Nanoclay on Physical, Mechanical and Morphological Properties of Wood Plastic Composite [Volume 27, Issue 2, 2012, Pages 189-201]
Nourbakhsh, Amir
Investigation on the effect of nanoclay on physical and tensile properties of nanocomposite made from reed residues [Volume 27, Issue 2, 2012, Pages 202-211]
Nourbakhsh, Amir
Comparing four lignocellulosic materials in the properties of
wood plastics/ nanoclay composites [Volume 27, Issue 2, 2012, Pages 235-255]
Nourbakhsh, Amir
Wood plastics composites: Bond formation mechanism and
mechanical properties [Volume 27, Issue 1, 2012, Pages 27-37]
Nourbakhsh, Amir
The mechanical properties of Pinus taeda L. wood growing in different
regions of Caspian forests [Volume 27, Issue 1, 2012, Pages 178-187]
P
Parsa paghoh, Davood
Properties of high quality paper from rag fibers recycling [Volume 27, Issue 3, 2012, Pages 434-444]
Pourtahmasi, Kambiz
Investigation the acoustic behavior of poplar and spruce species reaction
wood using ultrasonic technique [Volume 27, Issue 2, 2012, Pages 306-318]
R
Rahimi, Sohrab
Evaluation of the properties of wood sawdust-cement perforated blocks [Volume 27, Issue 2, 2012, Pages 294-305]
Rangavar, Hossein
study on the cut load test, siding strength of two ready-to-assemble corner joints and comparing them with fixed joints [Volume 27, WINTER 4, 2012, Pages 619-634]
Resalati, Hossein
Study of variation trends of fiber dimensions in longitudinal direction
of Zagross wheat straw in Golestan province for papermaking [Volume 27, Issue 3, 2012, Pages 545-555]
Resalati, Hossein
The effects of pre-treatment and consistency on treatment time and brightness of bagasse alkaline peroxide mechanical pulp [Volume 27, Issue 1, 2012, Pages 143-155]
Roohnia, Mehran
The impact of nanoclay on the performance of polypropylene/OCC fibers/nanoclay composite [Volume 27, Issue 3, 2012, Pages 373-385]
Roohnia, Mehran
Investigation on the properties of polypropylene/old corrugated container fibers composites with added foaming agents [Volume 27, Issue 3, 2012, Pages 445-460]
Roohnia, Mehran
The impact of air pollution on cross section anatomical characteristics
Of Pinus eldarica wood [Volume 27, Issue 1, 2012, Pages 129-142]
Rostampoor haftkhani, Akbar
Investigation on lateral load of joints made with various screws on
commercial wood-plastic composite [Volume 27, Issue 1, 2012, Pages 100-113]
S
Sabor, Mehdi
Effect of xylanase treatment on properties of alkaline peroxide mechanical
pulp from poplar (Populus nigra) wood [Volume 27, Issue 1, 2012, Pages 156-166]
Sadat nia, Mohammad ali
Investigation the acoustic behavior of poplar and spruce species reaction
wood using ultrasonic technique [Volume 27, Issue 2, 2012, Pages 306-318]
Sadeghifar, Hassan
Identification of chemical compounds in hexane extractives of black
locust heartwood by GC/MS method [Volume 27, Issue 3, 2012, Pages 461-470]
Safdari, Vahid
Anatomical, morphological and chemical properties of Tobacco stalk
(Nicotiana tabacum L.) [Volume 27, Issue 3, 2012, Pages 495-509]
Safdari, Vahid
Anatomical, physical and chemical properties of
(Seidlitzia rosmarinus Bunge ex Boiss) wood in irano-torani region [Volume 27, Issue 2, 2012, Pages 112-225]
Safdari, Vahid
Effect of nano-silica and bagasee fibers on bending strength and physical
properties of cement fiberboards [Volume 27, Issue 1, 2012, Pages 167-177]
Safdari, Vahidreza
Identification of chemical compounds in hexane extractives of black
locust heartwood by GC/MS method [Volume 27, Issue 3, 2012, Pages 461-470]
Sakhavati, Neda
Investigation of selected physical, biometrical and mechanical properties of
Cerasus mahaleb (L.) mill in the middle Zagros forest site [Volume 27, Issue 2, 2012, Pages 267-274]
Salehi, Kamyar
Papermaking aspects of five common varieties of sugarcane in Iran [Volume 27, Issue 1, 2012, Pages 114-128]
Samariha, Ahmad
Comparison of the NSSC pulp characteristics from Mazandaran wood and
paper mill and rapeseed straw NSSC pulp [Volume 27, Issue 2, 2012, Pages 326-337]
Samariha, Ahmad
Effects of fungal treatments on chemi-mechanical pulp and paper
properties from hornbeam wood [Volume 27, Issue 1, 2012, Pages 1-15]
Saraeian, Ahmad reza
Study of variation trends of fiber dimensions in longitudinal direction
of Zagross wheat straw in Golestan province for papermaking [Volume 27, Issue 3, 2012, Pages 545-555]
Saraeyan, Ahmad reza
The effects of pre-treatment and consistency on treatment time and brightness of bagasse alkaline peroxide mechanical pulp [Volume 27, Issue 1, 2012, Pages 143-155]
Sepahvand, ُSima
Construction of Particlboard Using Tannin-Based Phenol Adhesive [Volume 27, WINTER 4, 2012, Pages 655-663]
Sepidedam, Sayed javad
Effect of nano-silica and bagasee fibers on bending strength and physical
properties of cement fiberboards [Volume 27, Issue 1, 2012, Pages 167-177]
Sepidedam, Seiad Javad
Investigation on the impact of multi wall carbon nano tubes (MWCNT) addition on the mechanical properties, water absorption and thickness swelling of polypropylene/old corrugated container fibers composite [Volume 27, Issue 3, 2012, Pages 522-535]
Sepide dam, Sead Javad
Investigation on the properties of totally chlorine free bleached
soda - oxygen pulp from old corrugated container [Volume 27, Issue 2, 2012, Pages 256-266]
Sepideh dam, Seyad Javad
Investigation on the properties of polypropylene/old corrugated container fibers composites with added foaming agents [Volume 27, Issue 3, 2012, Pages 445-460]
Shabani, Behzad
The impact of air pollution on cross section anatomical characteristics
Of Pinus eldarica wood [Volume 27, Issue 1, 2012, Pages 129-142]
Shakeri, Alireza
Investigation on effect of acetylation and antioxidant on weathering resistance of wood/HDPE composite [Volume 27, WINTER 4, 2012, Pages 707-716]
Sharifi, Saeideh
The effects of pre-treatment and consistency on treatment time and brightness of bagasse alkaline peroxide mechanical pulp [Volume 27, Issue 1, 2012, Pages 143-155]
Sraeyan, Ahmadreza
Comparing the effect of alkali charge and treatment time on the properties of
bagasse and eastern cottonwood cold soda pulp [Volume 27, Issue 1, 2012, Pages 16-26]
T
Tabarsa, Taghi
Construction of Particlboard Using Tannin-Based Phenol Adhesive [Volume 27, WINTER 4, 2012, Pages 655-663]
Tabarsa, Taghi
Investigation on the properties of cement fiber board produced
using waste paper [Volume 27, Issue 2, 2012, Pages 338-347]
Tabei, Asghar
Anatomical, morphological and chemical properties of Tobacco stalk
(Nicotiana tabacum L.) [Volume 27, Issue 3, 2012, Pages 495-509]
Tajdini, Ajang
Effect of nanoclay on mechanical properties of HDPE/wheat straw composite [Volume 27, WINTER 4, 2012, Pages 595-605]
Tajedini, Aghang
The effect of erosion on anatomical characteristics of root and bark of Juniperus excelsa [Volume 27, WINTER 4, 2012, Pages 529-583]
Tajedini, Aghang
The Influence of Silica Content on Mechanical Properties of Polypropylene/Wood Powder/Silica Composite [Volume 27, WINTER 4, 2012, Pages 595-605]
Tajvidi, Mehdi
Investigation on the stress relaxation behavior of milled
newsprint filled polyethylene composite [Volume 27, Issue 2, 2012, Pages 226-234]
Tajvidi, Mehdi
Investigation on lateral load of joints made with various screws on
commercial wood-plastic composite [Volume 27, Issue 1, 2012, Pages 100-113]
Talaeipoor, Mohammad
Effects of fungal treatments on chemi-mechanical pulp and paper
properties from hornbeam wood [Volume 27, Issue 1, 2012, Pages 1-15]
Talaeipoor, Mohammad
Effect of xylanase treatment on properties of alkaline peroxide mechanical
pulp from poplar (Populus nigra) wood [Volume 27, Issue 1, 2012, Pages 156-166]
Taremian, Asghar
Possibility of using non-destructive spectrophotometery to detect the poplar tension
wood and spruce compression wood in freshly cut and dried timbers [Volume 27, WINTER 4, 2012, Pages 568-753]
Tasoji, Mohammad
The Effect of Lignocellulosic Material and Nanoclay on Physical, Mechanical and Morphological Properties of Wood Plastic Composite [Volume 27, Issue 2, 2012, Pages 189-201]
Tavakoli, Hossein
Study of some Apparent, Anatomical and Physical properties of Divdal ҆s (Ammodendron persicum) wood from Zirkooh-Qhaen [Volume 27, WINTER 4, 2012, Pages 664-676]
V
Valizadeh, Eiman
Investigation on the properties of cement fiber board produced
using waste paper [Volume 27, Issue 2, 2012, Pages 338-347]
Z
Zabihzadeh, Majid
Effects of oxidized recycled fibers on paper properties [Volume 27, Issue 3, 2012, Pages 409-422]
Zahedi, Meysam
Construction of Particlboard Using Tannin-Based Phenol Adhesive [Volume 27, WINTER 4, 2012, Pages 655-663]
Zahedi tabarstani, Ahmad reza
Investigating the properties of medium density fiberboard from
licorice root residues [Volume 27, Issue 3, 2012, Pages 471-482]
Zanganeh, Hoshangh
Investigation of selected physical, biometrical and mechanical properties of
Cerasus mahaleb (L.) mill in the middle Zagros forest site [Volume 27, Issue 2, 2012, Pages 267-274]
Ziaei Tabari, Hassan
Investigation on the effect of nanoclay on physical and tensile properties of nanocomposite made from reed residues [Volume 27, Issue 2, 2012, Pages 202-211]
